MSP430F149IPMR

Product Summary

The Texas Instruments MSP430 family of ultralow-power microcontrollers consist of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low power modes is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that attribute to maximum code efficiency.The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 6 μs.
The MSP430x13x and the MSP430x14x(1) series are microcontroller configurations with two built-in 16-bit timers, a fast 12-bit A/D converter (not implemented on the MSP430F14x1 devices), one or two universal serial synchronous/asynchronous communication interfaces (USART), and 48 I/O pins.

Parametrics

absolute maximum ratings over operating free-air temperature (unless otherwise noted):
(1)Voltage applied at VCC to VSS:-0.3 V to + 4.1 V;
(2)Voltage applied to any pin (see Note):-0.3 V to VCC+0.3 V;
(3)Diode current at any device terminal:±2 mA;
(4)Storage temperature (unprogrammed device):-55℃ to 150℃;
(5)Storage temperature (programmed device):-40℃ to 85℃
NOTE: All voltages referenced to VSS. The JTAG fuse-blow voltage, VFB, is allowed to exceed the absolute maximum rating. The voltage is applied to the TDI/TCLK pin when blowing the JTAG fuse

Features

(1)Low Supply-Voltage Range, 1.8 V~3.6 V;
(2)Ultralow-Power Consumption:Active Mode: 280 μA at 1 MHz, 2.2V;Standby Mode: 1.6 μA;Off Mode (RAM Retention): 0.1 μA;
(3)Five Power-Saving Modes;
(4)Wake-Up From Standby Mode in less than 6 μs;
(5)16-Bit RISC Architecture,125-ns Instruction Cycle Time;
(6)12-Bit A/D Converter With Internal Reference, Sample-and-Hold and Autoscan Feature;
(7)16-Bit Timer_B With Seven Capture/Compare-With-Shadow Registers;
(8)16-Bit Timer_A With Three Capture/Compare Registers;
(9)On-Chip Comparator;
(10)Serial Onboard Programming,No External Programming Voltage Needed,Programmable Code Protection by Security Fuse;
(11)Serial Communication Interface (USART),Functions as Asynchronous UART or Synchronous SPI Interface:Two USARTs (USART0, USART1)-MSP430x14x(1) Devices;One USART (USART0)-MSP430x13x Devices;
(12)Family Members Include:MSP430F133:8KB+256B Flash Memory,256B RAM;
MSP430F135:16KB+256B Flash Memory,512B RAM;
MSP430F147, MSP430F1471;32KB+256B Flash Memory,1KB RAM;
MSP430F148, MSP430F1481,48KB+256B Flash Memory,2KB RAM;
MSP430F149, MSP430F1491,60KB+256B Flash Memory,; 2KB RAM;
(13)Available in 64-Pin Quad Flat Pack (QFP) and 64-pin QFN;
(14)For Complete Module Descriptions, See the MSP430x1xx Family User's Guide,Literature Number SLAU049

Diagrams

<IMG border=0 src="http://www.seekic.com/uploadfile/ic-mfg/20128165620943.jpg">